Iris Innovations
Partners

The Iris Innovations IM-DCS-03 Video Switcher and IM-DCS-04 Control Keypad allow full control over your docking camera system.

Video feeds from on-board cameras can be viewed real-time, in a number of different configuations, such as Full Screen, Picture in Picture, Split screen and Quad Screen.

Being fully water-resistant, the Control Keypad can be installed where-ever desired, inside, outside, or even in both positions, and allow you to select between the different viewing modes, single camera feeds and access the setup menu.

The IM-DCS-03 Video Switcher also has alarm input capabilities, and so can be used as part of an extended system such as our SeeSeaTV monitoring range. By using the Iris IM-ZG1-01 interface unit, you can even use a Zone Guard system to switch camera images to monitors in an alarm event.

 
Technical Specifications: Video Splitter
Video Inputs/Outputs: 1 V pk-pk 75 ohms
Capacity: 4 x Inputs / 2 x Outputs / Video Loopthrough
Resolution: 720 x 576
Camera Termination: 75 Ohms or higher Impedance
Auto Sequencing: Sequential / Random
Dwell Times: 1 to 99 seconds
Alarms Inputs: Contacts (10k Ohm pull up to 5V on each input)
Contact Polarity: Normally Open
Actions on Alarm: Pull up full screen and auto sequence
Alarm Hold Time: 0 – 99 seconds
Alarm Sequence Time: 0 – 99 seconds
Relay Contact Rating: 24 Vdc 500mA max, change-over contacts
Hold Time: 0 -99 seconds
Humidity: 5 to 95 % non condensing
Operating temp: 0 to 45 degrees Centigrade
DC Input: 12Vdc
Dimensions: 170 x 200 x 46mm (out of protective case)
Weight: 2kg
 
Technical Specifications: Control Keypad
Dimensions: 90 x 90 x 4mm mounting plate / 80 x 80mm keypad
Materials: U.V Stabilised polyester keypad/Makrolon polycarbonate mounting plate.
Fixings: 4 x 3mm clearance holes, countersunk for screw fit.
Switches: 6 tactile membrane switches for camera inputs and modes
Mounting plate colour: White or Black as standard
Connector: 9 way ‘D’ type female
Power: This unit is passive
Enviromental: TBC
Weight: TBC
Rating: TBC
 
Product Part Number Specifications:

The Video Switcher unit is referred to with the product code: IM-DCS-03, and its associated keypad is referrenced as: IM-DCS-04.
Screw fixings, BNC connectors and sealants are available separately. Please refer to Product Part Number specification sheet for full details.

Each unit initially comes supplied with all necessary fixings, protective cover, cable flylead and full installation instructions as well as full 2 year return to base warranty.

 
Additional Information:

Any values emitted are not yet available, and will be added as soon as possible.
When installed, the video splitter will be housed in a shock resistant case. This unit is intended to be installed in a dry enviroment. Refer to installation guidelines for further information.

 
Enter Username
Enter Password
Forgotten password?
Enter Username
Enter Password
  Not Registered?



















Tel: +44 (0)23 8045 4484
Fax: +44 (0)23 8045 8868
Email: info@iris-marine.com